MCFAN

MCFAN (Micro Channel array Flow ANalyzer)

MCFAN sheds blood through a capillary model made using semiconductor technology

This is a blood fluidity measuring device that can be observed on a monitor while magnifying the flow with a microscope.

Model: MCFAN HR300

More quickly!     More accurate!     Easier!

The MCFAN HR300 is a device that makes it easier to observe and measure blood fluidity, which previously required complicated operations.

Three features of MCFAN HR300

The MCFAN HR300 is a device that makes it easier to observe and measure blood fluidity, which previously required complicated operations.

Speedy inspection

No sample pretreatment is required.

Just press the initialization button

Measurement preparation is complete.

Easy operation

With the introduction of pipette tips and disposable tips,

Operation is simpler and more time-per-hour than conventional models

Multi-sample processing is now possible.

Convenient data management

By using the attached dedicated software,Measurements can be monitored in real time.

In addition, a report to the subject can be output on the spot So very convenient. Observation and measurement data You can file.

Operation flow

Simple operation with only 4 steps.

①Set a disposable chip.

②Set pipette tip.

③Set the capped sample.

④Press the start button.

Visually capture blood flow

Even if you give insurance guidance with just the words, “At this point, arteriosclerosis will proceed.” It is difficult for the subject to recognize it as a specific pressing issue.

This MCFAN is to make the patient aware of the problems in the body by showing the blood flow in images.

Blood smoothness

Blood muddy state

Inspection result report

A photo and a graph showing the progress until 100μL has flowed are shown.

It can be printed on the spot and handed to the examinee.

Main specifications of MCFAN HR300

An integrated MCFAN that incorporates measurement equipment, a microscope, and a camera for shooting.

processing powerMAX 10 tests / hour
Sampling methodSequential automatic sampling
Blood collection volume5cc
Sample amount200μL
Measurement amount100μL
microscopeObjective lens: 20x, Illumination: White LED
cameraColor 1/3 inch CCD image sensor
PrinterThermal line dot method
OutputVideo output, trigger output, RS-232C
Power supply100V±10V、50/60Hz、120VA
Size520(W)×400(D)×550(H) mm
HeavyApproximately 32.0Kg
Medical device permission number11B3X00009

Optima Inc.

1-48-11 Itabashi, Itabashi-ku, Tokyo 173-0004

TEL : 03-5375-2351  |  FAX : 03-5375-2360  |  E-mail : optima@optima-japan.jp

Copyright © OPTIMA Inc.